One-pass hot-rolled wide-flange beam with high load capacity and light self-weight; custom welded H-beam available.

Tapered-flange I-beam (standard & light series) with high bending strength for beams, bridge supports and machine frames.

U-shaped channel with strong bending/torsion resistance for purlins, columns, guardrails and scaffolding.

Equal & unequal angle, hot-dip galvanized for long-term corrosion resistance — for towers, supports, guardrails and brackets in outdoor and coastal environments.

Smooth, dimensionally accurate flat stock with square edges — for connectors, brackets, machine parts, gratings and hardware.

Solid hot-rolled round bar with a clean, uniform surface and dense core — for machining, forging, shafts, fasteners and structural work. Cold-drawn accuracy to ±0.1mm and larger forged rounds available.

Solid hot-rolled square bar with a dense core, straight body and clean square edges — for machining, forging, hardware tooling, gratings, gates and structural supports. Cold-drawn accuracy and hot-dip galvanized finishes available.

Six-sided solid bar with sharp, uniform edges and a bright cut face — the go-to feedstock for bolts, nuts, fasteners, valves, couplings and precision machined parts. Cold-drawn tolerance and smooth-surface options available.

High-strength, wear-resistant rail with a dense head and clean profile — for railways, mining tracks, gantry/overhead cranes, ports and rail-guided equipment. Light rail, heavy rail and crane rail, with drilled fishplate holes, fishplates, spikes and fasteners available.

Cold-formed galvanized C-section, light and easy to install — purlins, girts, steel-villa framing and racking.

Hot-dip galvanized H-beam, 20+ year corrosion life for coastal structures, PV racking and towers.

Galvanized I-beam for outdoor structures, bridge guardrails and port equipment in corrosive environments.

Galvanized channel for outdoor structures, scaffolding, guardrails and PV mounting.

The go-to outdoor corrosion material — power/telecom towers, guardrails and structural supports, 15–20 yr life.

Galvanized flat bar for earthing/lightning strips, connectors and hardware; bending & punching available.

Galvanized round bar for earthing rods, lightning conductors, fasteners and machine parts.

Seamless or welded square/rectangular hollow section with uniform wall, square corners and smooth welds — light, strong and versatile for steel structures, curtain-wall columns, machinery, guardrails and decoration.

Hot-dip galvanized rectangular hollow section with uniform wall, square corners and smooth welds — strong bending/torsion performance and long-term corrosion resistance for steel structures, frames, racks, curtain-wall columns and vehicle bodies.

Zinc-aluminum-magnesium (Zn-Al-Mg) coated square/rectangular hollow section — corrosion resistance up to 3–10× hot-dip galvanized, with self-healing cut edges and maintenance-free, coating-free service. Ideal for solar mounting, steel structures, highway guardrails and greenhouse frames.

High-frequency welded pipe, cost-efficient and full-range — fluid transport, structures and conduit.

No weld seam, high pressure capacity — oil, chemical, power, boiler and high-temperature service.

Large-diameter SAW (submerged-arc welded) spiral pipe for oil & gas transport, municipal water/drainage and structural piling. 3PE / FBE / cement-mortar anti-corrosion coatings available.

T-type / K-type push-on socket ductile iron pipe with zinc + bitumen exterior and cement-mortar lining — 50+ year service life, low noise and high impact strength for municipal potable water, gas and drainage networks.

HDG square tube, 20-year corrosion life for outdoor structures, PV racking and guardrails.

HDG rectangular tube — frames, racks, guardrails and PV mounting in outdoor environments.

HDG pipe for water, gas, fire-fighting and structures — meets global potable-water transport standards.

Seamless strength plus galvanized corrosion protection for oil, chemical, power and gas transport.

Large-diameter galvanized spiral pipe for municipal water, sewage, piling and marine works.

Steel strength with a plastic liner — hygienic, corrosion-free, non-scaling for potable water and chemicals.

Uniform-gauge HR coil, slit/cut-to-length to plate; for structures, machinery, autos and vessels.

Smooth zero-spangle GI coil for construction, appliances, autos and containers; ready for color-coating.

Regular-spangle GI coil, strong zinc adhesion, for roofing, framing and general fabrication.

Bright, tight-tolerance CR coil for autos, appliances, hardware and precision parts.

Pickled & oiled HR coil — near cold-rolled surface at ~30% lower cost, ready to stamp and bend.

55% Al / 43.4% Zn / 1.6% Si coating, 2–3× the corrosion life of GI, heat-resistant and bright.

Color-coated coil (PE / SMP / HDP / PVDF) for roofing and walls; any RAL color, 5–25 year weathering.

Premium Zn-Al-Mg coil — self-healing, cut-edge protection, ideal for PV racking and long-life outdoor use.

Diamond / lentil pattern anti-slip coil, slit to plate for floors, stair treads and platforms.

4mm+ HR plate, high strength & toughness for bridges, vessels, ships and heavy structures; UT available.

Cut-to-length HR plate, flat and easy to fabricate for structures, machinery and hardware.

Anti-slip patterned plate for factory floors, stair treads, platforms and decks.

Class-society certified hull plate (CCS/ABS/LR/BV/DNV/RS) with high strength and seawater resistance.

High-hardness plate (HB320–550) lasting 3–5× longer for mining, construction and port machinery.

Smooth zero-spangle GI plate for construction, appliances, autos and containers; color-coat ready.

Regular-spangle GI plate with strong zinc adhesion for general construction and fabrication.

Anti-slip checkered plate with HDG protection (15–20 yr) for damp and high-salt environments.

Bright, tight-tolerance CR plate for autos, appliances, hardware and precision instruments.

Pickled & oiled plate, near cold-rolled surface at lower cost — auto parts, frames and machine housings.

Al-Zn coated plate, heat-resistant to 315°C with 2–3× GI corrosion life for roofing and PV.

Ribbed reinforcing bar with strong concrete bond — buildings, bridges, roads and water works.

Coiled ribbed rebar for stirrups, slab and wall reinforcement; low waste and mechanized processing.

Smooth high-speed wire rod for drawing, nails, fasteners, wire rope and reinforcement.

Solid HR round bar for machinery, hardware, reinforcement and fasteners; cold-draw & zinc finishes.

Auto-welded rebar mesh, 3–5× faster than tying — slabs, pavements, tunnels and runways.