Pipes & Tubes1 / 5Ductile Iron Pipe
T-type / K-type push-on socket ductile iron pipe with zinc + bitumen exterior and cement-mortar lining — a coating selected for the specified environment service life, low noise and high impact strength for municipal potable water, gas and drainage networks.
- Standard
- GB/T 13295, ISO 2531, EN 545 (water), EN 598 (drainage), AWWA C151
- Sizes
- DN80–DN2600, WT class K9 / C25 / C30 / C40 (per ISO 2531)
- Length
- 5m / 6m (custom)
- Surface
- Zinc + Bitumen, Cement-Mortar Lined
- Joint
- T-type (push-on) / K-type (mechanical) / self-anchored
- Length
- 5m / 6m, customizable
- Coating
- Exterior metallic zinc (Zn200 g/m²) + bitumen; interior cement-mortar lined
- Material
- QT450-10, QT500-7 / EN-GJS-450-10, EN-GJS-500-7 / FCD450-10 (nodular graphite cast iron)
- Pressure
- PN10 / PN16 / PN25 rated
- Standard
- GB/T 13295, ISO 2531, EN 545 (water), EN 598 (drainage), AWWA C151
- Size range
- DN80–DN2600, WT class K9 / C25 / C30 / C40 (per ISO 2531)
We stock QT450-10, QT500-7, EN-GJS-450-10, EN-GJS-500-7 and more, matched to your destination standard.
Related products
View all productsSeamless or welded square/rectangular hollow section with uniform wall, square corners and smooth welds — light, strong and versatile for steel structures, curtain-wall columns, machinery, guardrails and decoration.
High-frequency welded pipe, cost-efficient and full-range — fluid transport, structures and conduit.
No weld seam, high pressure capacity — oil, chemical, power, boiler and high-temperature service.
Large-diameter SAW (submerged-arc welded) spiral pipe for oil & gas transport, municipal water/drainage and structural piling. 3PE / FBE / cement-mortar anti-corrosion coatings available.